Preparing FMD data: from supplier submission to technical review

Quick answer

Follow a practical FMD workflow covering part revisions, material breakdown, composition data, review and changes, with consulting and system support.

Author: StartrustPublished: Updated:

An FMD may be rejected because its product revision is unclear, its material weights cannot be reconciled or the source of an ingredient is unknown. Preparing a declaration means building a traceable set of product data, then checking its scope, structure, content and evidence.

Define the declared product first

Before assigning a survey, reconcile the customer, internal and manufacturer part numbers, specification revision and manufacturer. The same product name may cover different sources, formulations or surface treatments. If one declaration covers a family, record the basis and the list of covered products.

Consultants can help map customer formats and existing records into a part cross-reference, required fields and scope rules. Procurement identifies the right supplier contact; engineering confirms the physical design and materials; quality or compliance specialists determine whether the evidence supports the review. Procurement should not have to resolve every technical question alone.

Expand the part into materials and substances

Consider a hypothetical connector weighing 10 g: a 6 g plastic body and 4 g metal contacts. These figures illustrate the data structure and are not an actual product specification. The supplier should report the constituent substances of each material as required. If contacts are plated, the base material and plating need appropriate identification and reporting; a single entry for 4 g of metal may be insufficient.

IEC’s material declaration overview describes hierarchical composition information for product parts and materials. Define the required level of detail before collection. An internal BOM may provide a starting point without containing all material and substance information.

LevelHypothetical exampleInformation to verify
PartConnector, 10 gPart number, revision, manufacturer and declaration date
MaterialPlastic body, 6 gMaterial identity, mass and data source
MaterialMetal contacts, 4 gBase material, plating and required breakdown
SubstanceConstituents in each materialNames, applicable identifiers, mass or concentration
EvidenceComposition records, statements or testsScope, revision and basis for acceptance

Align units and identifiers before submission

Instructions should specify mass units, concentration bases and rounding. Milligrams and grams need conversion before comparison. One percent equals 10,000 ppm on the same mass-fraction basis, but a value referring to the whole product cannot be compared indiscriminately with one referring to an individual material.

CAS numbers or other applicable identifiers help distinguish substances. Do not invent a number where none applies or merge records merely because names look similar. Consultant-led training can use correct and incorrect examples to explain when suppliers must seek clarification upstream.

Separate completeness, plausibility and compliance

Completeness checks cover required fields, reporting scope and attachments. Plausibility checks examine mass totals, concentration bases, duplicate constituents and consistent hierarchies. If substances account for only 5.4 g of a 6 g material, ask about the remainder and the applicable disclosure rules. Do not invent a balancing ingredient.

Compliance review then applies requirements selected for the product, market and customer, including relevant list versions, thresholds and evidence. A complete composition total alone does not demonstrate regulatory compliance. Tolerances and the treatment of unknown or confidential ingredients need approved rules.

The supplier management module supports task assignment, response and attachment collection, composition completeness checks and substance compliance checks. Consultants and company specialists establish rejection reasons, escalation paths and approval conditions so that a system flag leads to a defined action.

Resolve missing and confidential information

Record each gap, its owner, deadline and possible impact. For confidential formulations, discuss confidentiality arrangements, authorized disclosure or other evidence accepted by the requester. The requesting party must still agree that the proposed evidence is sufficient.

During implementation, assess whether sensitive-field permissions, document versions and approval records are supported by existing functionality or require configuration. An uploaded attachment does not remove the need for technical review. Unknown ingredients should not be used to conceal substances that must be disclosed.

Keep approved data current

Changes to formulations, sources, plating, specifications, customer requirements or substance lists can affect the validity of a declaration. Consultants can help define change notification procedures and purchasing conditions; systems can organize subsequent surveys, responses and follow-up. Automatic BOM or PLM links require an explicit assessment of integration and impact-analysis scope.

Before submission, verify part revisions, structure, units, identifiers, mass reconciliation, resolved gaps, relevant evidence and assigned approvers. Sustainable procurement consulting can also help incorporate supplier segmentation and update obligations into ongoing commercial relationships, with specialist material compliance needs scoped separately.

Further reading

Official references

Sources checked: November 18, 2026.